9771-210 TRICONEX
describe
TRICONEX 9771-210
Field Terminal Basic Terminal Panel Basic Terminal Panel is a low-cost way to connect field wiring to Tricon. The basic termination panel allows you to isolate the Tricon chassis at a distance of up to 99 feet (30 meters)
Field signals are grouped in the enclosure. The basic termination panel consists of a PCB, with panel connectors and wiring terminals, mounted on a DIN rail compatible plastic housing. The housing is stuck on the mounting rail according to DIN 50022
The current voltage conversion anode is also installed on a horizontal input panel configured for current input. You must provide any other components required for the application. The panel connectors and wiring terminals are directly interconnected through PCBs
The compression terminals on the wiring terminals are designed for sizes 24 to 12 (03 to 21 meters). Please refer to Appendix B for fan out cable pin layout. Each signal label indicates the corresponding screw end on the termination panel
Sub. The pin number of the panel connector matches the pin number on the Tricon backplane connector. The basic termination panel is packaged with the cable that connects the Tricon chassis backplane to the basic termination panel
The female connector is keyed to match the male connector on the Tricon backplane. The male connector at the other end of the cable is keyed to match the male connector on the termination panel. The basic termination panel can be configured as follows:. Digital Input Panel
Digital output panel · Relay output panel · Analog input panel · Analog output panel · Pulse input panel · Pulse prime adder input panel RG1180 Terminal panel RG 1
Triconex 9771-210 panel field termination options, 4.5 inch (11.43 cm) width (across DIN rails), 5.729 inch (14.552 cm) length (along DIN rails), and 4.25 inch (10.795 cm) height (outward from DIN rails) Simple: Suitable for distributors and bulk order termination panels: Please request a quote for a discounted price. quantity
Introduction to the Triconex Tricon control system:
Main features of the Tricon control system
Tricon is a programmable and process control technology with high fault tolerance.
Its characteristics are as follows:
A. Provide a Triple Modular Redundancy Structure (TMR), with two identical sub circuits each performing independent degree of control. There is also a dedicated hardware/software architecture for “voting” on inputs and outputs
Able to withstand harsh industrial environments.
C. It can be installed on site, and module level installation and maintenance can be conducted online on site without disturbing field wiring.
D. Supports up to 118 1/O modules (analog and digital) and optional communication modules. The communication module can
Connect to Modbus hosts and ancillary devices, or to Foxboro and Honeywell Distributed Control Systems (DCS), other Tricons in peer-to-peer networks, and external hosts on TCP/IP networks.
E. Can support remote 1/module up to 12 kilometers from the host.
F. Using Windows NT based programming software to develop debugging control programs
The intelligent functions of the input and output modules reduce the workload of the main processor. Each 1/0 module has a micro processor. The micro processor of the input module filters and repairs inputs and diagnoses hardware faults on the module. output module
The microprocessor provides information for voting on output data, checks the validity of the output state through the feedback loop voltage at the output end, and can diagnose excitation line problems.
H. Provide complete online diagnosis and repair capabilities
1. Daily maintenance can be performed during Tricon startup and operation without interrupting the control process.
J. Provide “dual hot standby” support for 1/O modules, which can be used in critical situations where services cannot be provided in a timely manner.
NEW GE FANUC HORNER ANALOG INPUT MODULE HE800ADC920 I/O
Allen Bradley SLC 500 1746-NI4 Analog Input Module,VGC
Allen Bradley Analog Input Module 1746-NI4 1746NI4 A
Modicon AEG Analog Input Module AS-B875-111
MODICON 140-ACI-030-00/140ACI03000 ANALOG INPUT MOD
Siemens ET200B 4 Analog Input 6ES7134-0HF00-0?XB0