3500-22M BENTLY
Description
The 3500/22M Transient Data Interface (TDI) is the interfacebetween the 3500 monitoring system and compatiblesoftware (System 1 Condition Monitoring and Diagnosticsoftware and 3500 System Configuration software). The TDIcombines the function of a 3500/20 Rack Interface Module(RIM) with the data collection capability of a communicationprocessor such as TDXnet.The TDI resides in the slot adjacent to the power supplies of a3500 rack. It interfaces with M series monitors (3500/40M,3500/42M, etc.) to continuously collect steady state and
transient dynamic (waveform) data and pass this datathrough an Ethernet link to the host software.
Static data capture capability is standard with the TDI.However, using an optional Channel Enabling Disk will allowthe TDI to capture dynamic and high-resolution transientdata as well. The TDI incorporates the communicationprocessor function within the 3500 rack.Although the TDI provides certain functions common to theentire rack, it is not part of the critical monitoring path andhas no effect on the proper, normal operation of the overallmonitor system for automatic machinery protection. Every3500 rack requires one TDI or RIM, which always occupies Slot 1(next to the power supplies).
control
front panel
Clear latch alarms and timing errors in the rack
Rack Reset Press
Fixed channel fault. And the “machine” on the 1/0 module
button
The “rack reset” contact functions are the same
Address switch
Used to set rack addresses: 127 possible
address
Used to place a 3500 rack in “RUN” mode
Or “PROGRAM” mode, RUN mode allows
Allow normal operation of the rack and lock configuration changes
。 PROGRAM mode allows normal rack operation
, also allows local or remote rack configuration. key
Can be removed from any position on the rack, allowing
The switch remains in the RUN or programmed position. Turn the switch
Locking in the RUN position can limit unauthorized
Rack reconfiguration. Lock the switch in the
PROGRAM position can be remotely reconfigured at any time
Configure key lock
frame.
Specifications
InputsPowerConsumption10.5 WattsDataFront PanelUSB-B10Base-T10BaseTor100BaseTX100BaseTX1/0Ethernet,autosensing100Base-FX1/0100Base-FXFiber-OpticEthernet
