9200-06-01-10-00 BENTLY
9200-06-01-10-00 Bently Nevada 9200 Watt Vibration Probe
head
Supports ordinary cables 9571-17, 84661-17, and 84661-20 Sensitivity: correctly terminated and
When positioning at a calibrated angle
20 mV/mm/s (500 mV/in/s) ± 5% at 100 Hz (6000 CPM) and 25 mm/s (1 in/
s) ± 5% from zero to peak at 100 Hz (6000 CPM)
Frequency response: from the lowest operating frequency (see order information) to 1 kHz (60000 CPM); Typical value range
Range+0 to+3dB
Impact resistance: withstand 50 q peak maximum acceleration
Lateral sensitivity:+10% Max
Wire length: 305 meters (100 meters) maximum between Seismoprobe R and Bentley 3500 vibration monitor
0 feet). The frequency decays as the length increases.
Height: Typical value 102 mm (4 inches) (depending on connector options)
Diameter: Typical 41 mm (1.6 inches)
Weight: Typical 480 grams (17 ounces)
Connect a cable to connect the 9200 sensor to another instrument or velocity displacement converter. These cables are available in 300 mm (1 foot) increments with or without a stainless steel jacket. There are two types of velocity displacement converters
(VDCS) Optional: 9513: Used with 9200 and 74712 sensors. This Bentlv9200 is a dual wire sensor suitable for continuous monitoring or periodic measurement with testing or troubleshooting instruments
The 9200 has excellent corrosion resistance and does not require additional protection.
Cable connection standard cable 95712-core twisted pair, 22AWG (0.5mm2) shielded cable, equipped with a 2-socket moisture-proof female connector at one end and a lug at the other end. (For monitor or VDC): 846612
Twisted pair cable, shielded 22AWG (0.5mm2) armored cable, with a 2-socket moisture-proof female connector at one end and a lug at the other end. (Using a dry monitor or VDC): 97552 core shielded 22 AWG (0.5
Mm2) cable with 2-pin female connectors at both ends. Connecting a 9200 or 74712 sensor to a Bentley Nevada test kit): 839682 core smooth cable with a 2-pin shaft connector at one end and a 2-pin shaft connector at the other end
There are coaxial connectors (for instruments with BN connector input sockets).
Specifications for 9200-06-01-10-00
The Bentley Nevada speed sensor system measures absolute (relative to free space) vibration of the bearing housing, housing, or structure. The dual wire system consists of a sensor, a cable, and an optional speed displacement converter.
The Bentlv9200 series speed sensors are of a two wire structure and use dynamic coil technology to provide a voltage output that is proportional to the vibration speed of the sensor. Unlike solid velocity sensors, moving coil sensors are excited by shocks or pulses
Less sensitive, which makes them a better application choice. In addition, they make portable measurement applications more convenient because they do not require external power supplies. High performance casing speed measurement, more robust structure, and multiple connections can be used
Specifications for 9200-06-01-10-00 Bentley Nevada Speed Sensor Systems measure absolute (relative to free space) vibration of bearing housings, housings, or structures. The dual wire system consists of a sensor, a cable, and an optional speed displacement converter.
