1746-OW16 C AB
About 1746-OW16/C
The 1746-OW16 series C module is a MARINE certified digital contact output module manufactured by Allen Bradley. It has been certified with GOST, KCC, UL, cUL, C-Tick, and CE markings. It is mainly used in conjunction with programmable controllers. It has 16 outputs and a normally open relay contact. It has a current/output rating of 1.5 amperes (120 volts AC) and a current/output rating of 1.2 amperes (24 volts DC). The rated current of the module’s backplane is between 170 and 180 mA. It has a step response of 60 ms input and 2.5 ms output. Its working voltage is 5 to 265 volts AC or 5 to 125 volts DC. The 1746-OW16 C series modules have an open chassis with an open housing. This module consumes 0.033 watts of power under normal operating conditions. Its contact ratings are 120 to 240 volts AC and 24 to 125 volts DC.
The Allen Bradley 1746-OW16 C series modules should be installed in a clean and dry environment without any signs of electrostatic discharge. The module is sensitive to discharge and can affect normal operation. The operating temperature range is between 0 and 60 degrees Celsius. When the 1746-OW16 series C module is equipped with a maximum resistive load, the delay from signal on to off is 10 milliseconds. The maximum off state leakage current is 0 milliampere. When using 5 V DC, the minimum load current is 10 mA. It is equipped with an SLC 500 processor. The 1746-OW16 C series modules are widely used in automation systems. It is a compact device with minimal installation depth. This module can be programmed using Microsoft Windows compatible software.
1746-OW16/C
Description: Allen Bradley 1746-OW16 is an SLC 500 digital contact output module. This digital contact output module has sixteen (16) normally open (NO) relay channels, with operating voltages of 5-265 V AC or 5-125 V DC. O. It has two (2) output groups, each with eight (8) channels on the common end
SOLEMN COMMITMENT
1. Where the company sold items, module card parts, etc., quality problems in normal use within the warranty period free replacement, never shirk.
2. For materials and equipment not stopped production beyond the warranty period, only the cost of related parts will be charged if quality problems occur.
3. Provide replacement models and equipment replacement process services for materials and equipment that have been discontinued.
4. For materials and equipment purchased by customers, the system software will be upgraded for life, and relevant technical materials will be provided free of charge.
5. Visit customers’ use of purchased materials from time to time, and solve problems in time.
6. The company hotline provides 24-hour service, and customers’ questions can be answered within one hour.
7. For matters not covered, the company adheres to the attitude of “considerate service, responsible to the end”, solves problems from the perspective of customers, and serves every customer wholeheartedly with serious and rigorous enterprise style.
