1769-OB16 AB
About 1769-OB16
The 1769-OB16 compact solid-state output module is an Allen Bradley device with 16 outputs and a 24V DC voltage source. The operating voltage range of the 1769-OB16 module is 20.4 to 26.4 volts DC, with a delay output voltage of 0.1 milliseconds and a shutdown mode delay output of 1.0 milliseconds. The draw current of 1769-OB16 at 5.1V is 200mA, and the heat dissipation power is 2.11W. 1769-OB16 is a module with a leakage current of 1.0mA and a minimum conduction current of 1.0mA near 26.4V DC.
1769-OB16 has a maximum voltage drop of 1.0V (on state) at 1.0mA and a current of 1.0 ampere at 30 degrees. 0.5 amperes at 86 degrees Celsius and 60 degrees Fahrenheit. Degrees Celsius (140 degrees Fahrenheit) per point current (maximum). 1769-OB16 also has 8.0 A at 30 degrees. 4.0 A at 86 degrees Celsius and 60 degrees Fahrenheit. The current (maximum) at 140 degrees Celsius (140 degrees Fahrenheit) for each module can repeat a 2.0 A current (surge) for 10 milliseconds every 2 seconds. It is equipped with IEC level 2 reinforced insulation, which can prevent up to 75 V DC voltage. It has 8 modules with a single slot width and can be installed on DIN rail or panel mounting. The dimensions of the 1769-OB16 module are 4.65 x 1.38 x 3.43 inches (118 x 35 x 87 mm) and weigh 0.61 pounds (280 grams).
1769-OB16 is a compatible module for MicroLogix 1500 and 1769 CompactLogix controllers. This electronic module is a sixteen (16) channel 24VDC discrete output module. This module has a set of outputs, typically used to power electrical loads operating at 24VDC voltage.
This module is compatible with any 1769 CompactLogix controller and 1769 CompactLogix power supply, such as 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4. This module uses wiring terminals with part numbers 1769-RTBN18. The junction box is shipped with the module. When wiring modules, it is recommended to use 22-14 AWG solid wire and 22-16 AWG stranded wire.