2094-BC04-M03-S AB
About 2094-BC04-M03-S
2094-BC04-M03-S is a Kinetex 6000 driver system module. This component is manufactured by Allen Bradley and is intended to be used as an integrated shaft module for inverters. The rated output power of this module is 53 watts at 20% load, 72 watts at 40% load, 93 watts at 60% load, 116 watts at 80% load, and 142 watts at 100% load.
This module has a converter and inverter section. The inverter output rating of the converter section is 28kW and 30 amperes. This module is also known as the AM power module. It comes with a wiring plug connector kit for motor power supply (MP) and motor/resistor braking power supply (BC). This module does not provide input and output interfaces, safety and auxiliary feedback signals, and connector kits for motor feedback with catalog numbers 2090-K6CK-D44M and 2090-K6CK-D44S0.
When using this module, grounding jumper settings are not always required. However, ungrounded or high impedance power supply configurations require grounding jumper settings. To set the grounding jumper settings, remove the Integrated Access Module (IAM) from the power rail, open the power module, and modify the jumper position to the appropriate position. By default, the module is set to the grounded position, where P16 and P17 are short circuited, while P18 and P19 terminals are short circuited in an ungrounded configuration.
When installing 2094-BC04-M03-S, first install the integrated shaft module, then install the IPIM, shaft module, splitter module, and slot filling module. The IAM must be installed on the far left side of the power rail. The other modules are located on the right side of the IAM.
This module aims to provide Kinetix integrated motion solutions for your driver, motor, and actuator applications.
The 2094-BC04-M03-S has a safe disconnection torque function under 200V or 400V AC input power. It includes an inverter and a converter section. The 400V class (B-series and C-series) 2094-BC04-M03-S IAM module provides peak enhancement functionality. The 2094-BC04-M03-S driver can be connected to a grounding jumper.
