3500-22 BENTLY
The 3500/22M is a transient data interface module developed by Bently Nevada. It serves as an interface for software compatible with the 3500 Monitoring System (System 1 Status Monitoring and Diagnostic Software and 3500 System Configuration Software). TDI combines the 3500/20 Rack Interface Module (RIM function) with communication processors such as TDXnet to collect data.
3500/22M Features
In a 3500 rack, the TDI is located in the slot next to the power supply. In order to continuously collect steady-state and transient dynamic (waveform) data and transmit it to the host software through an Ethernet link, it interacts with M-series monitors (3500/40M, 3500/42M, etc.).
TDI has traditional static data collection capabilities. However, TDI can also use optional channels to enable disk recording of dynamic, high-resolution transient data.
Function Description
The 3500 rack contains communication processing functions for TDI. Although TDI performs some tasks shared by the entire rack, it is not a key component of the monitoring system and is not related to the effectiveness of autonomous mechanical protection monitored by the entire system.
Each 3500 rack requires a TDI or RIM, which always occupies slot 1. (Next to the power supply).
The link between the 3500 monitoring system and compatible software is called the 3500/22M Transient Data Interface (TDI) (System 1 Status Monitoring and Diagnostic Software and 3500 System Configuration Software). TDI combines the 3500/20 Rack Interface Module (RIM functionality) with communication processors such as TDXnet to collect data.
place
In a 3500 rack, the TDI is located in the slot next to the power supply. In order to continuously collect steady-state and transient dynamic (waveform) data and transmit it to the host software through an Ethernet link, it interacts with M-series monitors (3500/40M, 3500/42M, etc.). TDI has traditional static data collection capabilities. However, TDI can also use optional channels to enable disk recording of dynamic, high-resolution transient data.
The 3500 rack contains communication processing functions for TDI. Although TDI performs some tasks shared by the entire rack, it is not a key component of the monitoring system and is not related to the effectiveness of autonomous mechanical protection monitored by the entire system.
Each 3500 rack requires a TDI or RIM, which always occupies slot 1. (Next to the power supply).
Configure Keylock
It is used to switch 3500 racks between the “RUN” and “Program” modes. The RUN mode prevents configuration modifications while allowing the rack to operate normally. The rack can be configured locally or remotely, and can still operate normally in Program mode. By removing the key from any position on the rack, the switch can remain in the running or programming position. You can prevent unnecessary rack reconfiguration by locking the switch in the running position. Whenever it is necessary to remotely reconfigure the rack, the switch can be locked in the PROGRAM position.
Specifications
Part Number: 3500/22M
Manufacturer: Bently Nevada
Series: 3500
Product type: Transient Data Interface (TDI) module
Availability: In stock
Manufacturing country: United States
