125840-1 BENTLY
describe
When using the 125840-01 daisy chain rack interface 1/0 module, the following precautions should be taken:
。 Connect the host computer or daisy rack using the HOST port
Chain closer to the host.
。 Using RACK RS-422 port to connect racks far from the host
computer.
。 Connect the racks in the daisy using the following cables
Chain:
-125840-01 For lengths of 150 meters (500 feet) or shorter, use cables
。 130122-XXXX-XX (PVC insulated) or cable 131107-XXXX-XX (Teflon
Insulation).
-For lengths exceeding 150 meters (500 feet), use one cable
-130122-XXXX (PVC insulated) or cable 131107-XXXX-XX (Tefon
Insulation) along 125840-01 and as many RS-422 extension cables as possible
-130121-XX-XX (150 meters (500 feet) standard length) to create a
The cable length can reach 1220 meters (4000 feet).
Bentley 125840-01
describeDesigned the Honda speed sensorMeasure the bearing seat (relative to free space),Shell or structural vibration. 335 YesBuilt-in piezoelectric accelerometerIntegrated electronics in solid-state design.Because 335 integrates solid-state electronics andWithout moving parts, is it not subject to mechanical wearDegradation and wear, can be installed vertically,Horizontal or at an angle in another directionMeasurement housing for sensor placementIf the position of a casing is measured to determineWhen placing sensors, consider the type of measurement
Want to get. Common machine malfunctions are likeUnbalance or misalignment originates from the rotor and causes aChange – usually increase – rotor vibration.If you integrate the 335Velomitor output to measure displacement,The interference of electronic noise and the transducer circuit canZoom in. Noise will reduce the performance of the 335 sensorAnd generate inaccurate displacement data.To obtain high-quality data, place the sensor in one locationWhere can it detect machine vibrationBearing housing or machine housing. Select a location,
Earthing and shielding, amplitude andFrequency response and reduction do not represent dataActual machine vibration.
Product Description
As a member of the GE family, Bently Bently is proud to inherit and maintain this long-standing tradition in testing and control. The predecessor of GE was Edison Electric Company founded by Thomas Edison in 1878. Bently Company in the United States provides numerous products and services to various industries, thanks to its creativity and imagination.
GE Testing Control consists of traditional companies including AGFA ND, Bently Nevada, Druck, Everest VIT, General Eastern, Hocking NDT Kaye, Krautkramer, Novasensors, Panametrics, Phoenix | X-ray, Protometer, Reuters Stokes, Rheonik, Seifert NDT, SI, Teleire, Thermometrics, and Woodward Controls.
Bently Bently’s key business in testing and control in the United States covers various industries and numerous applications, including testing (NDT), sensing, asset condition monitoring, control and instrumentation, and radiation measurement. We are constantly establishing practices and exploring future solutions, all for the quality, safety, service, and productivity that our customers enjoy.
BENTLY Bentley sensors are typically installed on machines or surfaces for measuring vibration, displacement, rotational speed, pressure, torque, and energy. Bently Nevada offers a variety of sensors that meet the requirements of industrial environments. Some sensors can be installed in hazardous areas after adopting methods such as intrinsic safety barriers and electromagnetic edges. If your requirements are not within our standard product range, we can also modify existing products or develop products to meet your needs.
Manufacturer:Bently Nevada
Product number:3500/15 125840-02
Product type:3500/15 low-voltage AC power input module
Made in the United States
Certificate of origin(COO)can be added
Shipping weight:3 kilograms
