190065A-01-01-01-00-00 BENTLY
Channel number (14) being configured for 1900/65A-01-01-00-00.
a slot
The position of the monitor in the 3500 rack (12 to 15).
rack type
Identify the type of rack interface module installed in the rack (standard
Or TMR).
Enable
Direct
Due to changes in the position of thermal growth relative to the axis
Housing. This value may be displayed in inches or millimeters. this
Proportional values support center zero and non center zero full scale
Range.
disparity
1900/65A-01-01-01-00-00 Physical distance between the surface of the proximity probe tip and the probe
Observed surface. The distance is expressed in voltage. standard
According to the polarity convention, reducing the gap leads to an increase
(Reduce load) Output signal. When the channel or
The proportional value is bypassed or defeated (for example, when a problem
Occurring on the transducer). 1900/65A-01-01-00-00-00 The selected value can be between
Minimum and maximum full-scale range values. Only available values
From recorder output, communication gateway, and display
When the interface module is clamped to the specified value, the proportion
Invalid value.
Recorder output
The proportional value of the channel sent to the 4 to 20mA recorder.
The recorder output is proportional to the measured value
Channel full scale range. An increase in the proportional value will
Displaying high gear on the bar chart display will cause
Currently outputting from the recorder. If the channel is bypassed, the output will
Be clamped to the selected clamping value or 2mA (if 2mA is clamped)
Selected)
Manufacturer:Bently Nevada
Product number:1900/65A-00-01-01-01-00
Product Type:1900/65A Universal Device Monitor
Made in the United States
Certificate of origin(COO)can be added
Power option:00=18 to 36 Vdc
Display option:01=Additional display(without cable)
Installation option:01=DIN rail installation(see Figure 1)
Approval option:01=Multiple approvals.For specific certifications,please refer to the Hazardous Area Certification section.
Communication option:00=none
Monitoring module size(length x width x height):19.69 cm x 14.94 cm x 7.44 cm
Shipping weight:8 kilograms