350042-07-00 BENTLY
Scale.
3500/42M-07-00 Adjustment Button
Adjust the zero position voltage. When this button is clicked, the utility will launch
Help you set the gap zero voltage. Due to the proactive nature of this utility
Feedback from the 3500 rack requires connection to the rack. reference resources
Section 5.2 (Adjusting the Scale Factor and Zero Position).
describe
3500/42M-07-00 represents the zero position (volts) when reading the gap scale
The engineering unit of displacement. Ensure maximum quantity is zero
When adjusting, the probe gap should be as close as possible to the center gap
The voltage specified in the OK Limit table. This field is not applicable to Voltage Gap
3500/42M-07-00 Selected value for temporarily increasing Alert and Danger setpoints
Value. This value is usually applied through manual (operator) operation during startup
Allow the machine to pass through a high vibration speed range without monitoring
The alarm indicates that this high vibration speed range may include the system
Resonance and other normal transient vibrations.
Direct frequency response
The upper and lower corners of the bandpass 3500/42M-07-00 filter are used in conjunction with direct vibration
Measurement. Available ranges are 240 to 240.000 cpm and 60 to 36000
Cost per thousand displays.
IMAJE ENR16423 C CPU BOARD CPU MJT S4
Carlo Gavazzi 9441363-02 REV E COmpact PCI CPU Board
Radisys/Intel EPC3306 ESC 3306 COmpact PCI CPU Board
KONICA QX-60 A MAIN CPU BOARD#6227-01 101 QX-70 130
DATEX ENGSTROM CPU BOARD AW 4F 889467-2.
