FPS400-24 FOXBORO
describe
I/A Series System FPS400-24 DIN Rail Mount Power Supply
Using 400 W as the DIN rail to install the subsystem backplane, provide 24V DC power.
Special feature: Double stage current limiting port, overvoltage shutdown, power outage, transformer isolation, 24V DC output port, Class 1, DIV2, Zone 2 application, OU, UL-C, and CENELEC certification port, G3 level, suitable for outdoor field equipment in harsh dry environments
Power supply 0 convection cooling (without fan) 0 sealed enclosure 0 horizontal or vertical DIN rail installation 0 holes for mounting with a thousand brackets or walls
If needed, FPS240-24 and FPS120-24 power supplies can be used. They are on DIN rails
Install power supply – FPS240-24 and
FPS120-24 (PSS 21H-2W7B4) was discussed.
Wide range input voltage
Efficient input circuit automatic acceptance
AC or DC input voltage. 120/240 Vac or
The 125 V DC input circuit (P0922YU) provides a range of 85 to 265 Vac at operating frequencies of 47 to 63Hz
(or 108 to
145 V DC to meet global power requirements.
24 Vdc power input circuit (P0922YC)
Accepts a range of 18 V DC to 35 V DC.
high efficiency
Sealed power supply with excellent efficiency
(P0922YU up to 95%, P0922YU up to 81%)
P0922YC) leads to high reliability and low faults
Rate.
Based on the average electricity bill
And the load, their return on investment (ROI) is less than two years.
Power factor correction circuit
Advanced AC input design (P0922YU)
Provide an active sinusoidal current curve for approaching a unified controlled power factor.
Technical Specification FPS400-24
characteristic:
Wide range of AC/DC input voltage
high efficiency
power factor correction
Two stage limited flow
Voltage shutdown circuit
The Schneider Electric/Innvensys/Foxboro FPS400-241/A series DIN rail mounting power supply provides 24VDC for the DIN rail mounting substrate. This is a 400W power supply certified by the organization for use in Zone 2 and Zone
2 Applications. Provide two types of input voltage power supplies: 120/240VAC or 125VDC input (P0922YU) and 24VDC input (P0922YC). These are the only ones tested and certified by Invensys for the 200 series FBM
Power Supply.
FPS400-24 features include:
-Extremely efficient
-Power factor correction
-Two-stage current limiting
-Overvoltage shutdown circuit
-Transformer isolated 24V DC output
-UL, UL-C, and CENELEC certifications
-G3 level is suitable for harsh environments
-Power supply for external on-site equipment
-Relay (Type C) status alarm output
FPS400-24 can also be used as an on-site power supply,
Power supply for external on-site equipment. But, in order to
System integrity, on-site equipment and DIN rail base plate
It should not be powered by the same FPS400-24.
