IPM2-P0904HA FOXBORO
describe
FOXBORO IPM2-P0904HA
1.2 Specifications
The following specifications describe the
Published operating characteristics of the series power supply:
Package size
Size 1- Up to 20kW nominal output
Size 2- Up to 30kW nominal output
Size 3- Up to 60kW nominal output
Size 31/2- nominal output up to 90kW
1.2.1 AC Input:
460V ± 10% 60Hz standard, or specified optional voltage.
IPM02-P0904HA FOXBOROI/A Series Industrial Power Module 2
characteristic:
100/120/220/240VAC optional input
39V DC output
Status indicator light
Schneider Electric/Innvensys/FoxboroP series 1/A industrial power module with 100/120/22/24VAC optional input, 39VDC output, and status LED
Adjustment:
Voltage mode – for
The change in line voltage or load current within the rated range of the power supply will not exceed the change in output voltage
0.1% of the maximum rated current.
Current mode – for
The change in line voltage or load voltage within the rated range of the power supply will not exceed the change in output current
0.1% of the maximum rated current.
On devices where the percentage of voltage or current ripple exceeds the specified value, due to the impact of this ripple on the measurement
The impact of regulations seems to be decreasing. 1.2.3 Stability: After preheating, the output voltage or current remains within 0.05% for 8 hours, with constant external influence. 1.2.4 Ripple: Grounded at the positive or negative output terminal and 100% output
The output changes caused by load changes between 50% and 100% of the limit value are usually
Restore to within 1% of its final value within 200 milliseconds.
Temperature coefficient:
The output voltage TC is 0.02%/℃ of the maximum rated value.
The output current TC is 0.03%/℃ of the maximum rated value.
Working temperature:
0 ° C to 50 ° C at
At an ambient temperature of 71 degrees Celsius, the current linearly decreases to 50% of the rated value of the meter.
Storage temperature:
-40 degrees Celsius to+85 degrees Celsius.
Instrument:
Voltmeter, ammeter, power indicator, input phase indicator and
Work mode indicator light.
Control:
Circuit breaker switch control, start/stop button switch, voltage
And current control.
A200 Overbed Protection Adjustment for Units Equipped with OVP Option
Cooling:
All devices are equipped with fan cooling and constant temperature protection. Air enters from the front of the equipment
From behind
