SCC-AO10 NI
This document provides information and parameters for the SCC-AO10 NI product.
Product Overview
The SCC-AO10 is a 10-channel analog output module that can be used with National Instruments (NI) CompactDAQ or CompactRIO chassis. It provides 16-bit resolution and a maximum output voltage range of ±10 V.
Technical Specifications
- Channels: 10
- Output Voltage Range: ±10 V
- Resolution: 16-bit
- Output Current: 10 mA (max)
- Output Impedance: 2.5 Ω (max)
Connector Information
The SCC-AO10 module has two 37-pin D-sub connectors for connecting to the CompactDAQ or CompactRIO chassis. The pinout for these connectors is as follows:
Pin | Signal Name |
---|---|
1 | AO0 |
2 | AO1 |
3 | AO2 |
… | … |
36 | AO9 |
37 | GND |
Parameter Settings
The following parameters can be configured for the SCC-AO10 module:
- Output Voltage Range
- Output Mode (Single-Ended or Differential)
- Output Update Rate
- Output Slew Rate
- Output Enable/Disable
- Output Trigger
Conclusion
The SCC-AO10 is a versatile and reliable analog output module that provides high-resolution and accurate voltage outputs for NI CompactDAQ and CompactRIO systems. The technical specifications and parameter settings outlined in this document will aid in setting up and configuring the SCC-AO10 module for your specific application.