The GE VMIVME-7486 is an industrial computer module used primarily in embedded systems and automation applications. It is based on the Intel 80486 processor architecture and designed for use in the VMEbus (Versa Module Europa) system.
Product Name
GE VMIVME-7486 Module
Product Description
The GE VMIVME-7486 is a high-performance VMEbus module that integrates a 486 microprocessor and memory with the capability to support various input/output configurations. This module is commonly used in industrial control systems, communication systems, and embedded computing applications where reliability and processing power are essential.
Product Parameters
- Processor: Intel 80486 microprocessor
- Architecture: 32-bit
- Clock Speed: Typically 33 MHz or 50 MHz (depends on the specific variant)
- Memory Options:
- RAM: Options for up to 16 MB of onboard memory
- EEPROM: Non-volatile storage options
- I/O Interfaces:
- Serial ports (COM)
- Parallel ports (LPT)
- Optional networking interfaces (e.g., Ethernet)
- Bus Interface: VMEbus (with configurations for different functionalities)
Specifications
- Form Factor: 6U VME form factor
- Dimensions: Standard VME dimensions (typically 100mm x 160mm)
- Power Requirements: Varies according to configurations, usually supplied via the VMEbus
- Operating Temperature: Designed to operate in harsh industrial environments, often in the range of -40°C to +70°C (check specific module data)
- Certification: May meet specific industrial standards (e.g., MIL-STD for military applications)
Product Use
The VMIVME-7486 module is broadly used in various applications, including but not limited to:
- Industrial Automation: Control systems for manufacturing equipment and monitoring.
- Aerospace and Defense: Used in ruggedized environments for data processing.
- Communication Systems: Processing data communications in a networked setup.
- Research and Development: As part of experimental setups requiring robust computing capabilities.
- Medical Equipment: Used in embedded systems for diagnostic and monitoring devices.
| ABB 3HAC029157-001/06 |
| ABB 3HAC026840-001/00 DCS |
| 3HAC025097-001 ABB PLC |
| ABB 3hna006137-001/02 PLC |
| DSQC676 PLC |
| ABB 3HAC031612-004 PLC |
| 3HAC025562-001 ABB |
| DSQC652 ABB DCS |
| ABB 3HAC025917-001/00 PLC |
| ABB 3HAC026254-001 |
| 3HAC021455-001 ABB PLC |
| ABB 3HAC17345-1 |
| ABB DSQC667 |
| ABB 3HAC17346-1 |
| ABB 3HAC021457-001 PLC |
| ABB 3HAC17342-1 PLC |
| ABB 3HAB8440-1 PLC |
| 3HAC17343-1 ABB PLCPLC |
| ABB 3HAC1855-1 |
| ABB 3HAC021456-001 |
| 3HAC031851-001 PLC |
| ABB 3HAC029157-001 I/O |
| 3HAC7998-1 PLC |
| 3HNA011999-001 PLC |
| 3HNA011784-001 ABB |
| 3HAC17339-1 ABB PLC |
| ABB 3HAC031936-001 PLC |
| ABB 3HAC029924-001 PLC |
| 3HAC029924-005 ABB PLC |
| ABB 3HAC17330-1 DCS |
| ABB DSQC505 PLC |
| ABB 3HNE04092-1 PLC |
| ABB 3HAC5393-1 PLC |
| DSQC346G ABB PLC |