135137-01 BENTLY
describe
135137-01 Do not discharge static electricity onto the circuit board. Avoid using tools or
Procedures that can cause electrostatic damage to circuit boards. some
Possible causes include ungrounded soldering iron, non conductive
Plastics and similar materials.
-135137-01 Personnel must use a suitable ground strap (e.g. 3M
Velostat No. 2060) before handling or maintaining printed circuit boards.
-Transport and store circuit boards in conductive bags or foil.
-Be extra careful in dry weather. 135137-01 Relative humidity less than 30%
Tends to increase the accumulation of static charges on any surface.
The 135137-01 is a positional I/O module with internal terminals that can be used with proximitors, RPTs, or DC LVDTs. It was designed and developed by Bently Nevada. It is part of the 3500/45 monitoring system. The position monitor is a 4-channel device that can receive inputs from rotary potentiometers, proximity sensors, DC linear variable differential transformers, AC linear variable differential transformers, and rotary position sensors (RPTs).
135137-01 Features
The Bently Nevada 3500/45 position monitor has four channels and can accept inputs from proximity sensors, rotary position sensors (RPTs), DC linear variable differential transformers (DC LVDT), AC linear variable differential transformers (AC LVDT), and rotary potentiometers.
The main function of this monitor is to protect your machine by continuously comparing monitoring parameters with configured alarm setpoints to drive alarms and collect critical machine information for operation and maintenance.
features
Dimensions (H x W x D): 241 mm x 24.4 mm x 99.1 mm
Weight: 0.44 kg (0.96 lb)
