136483-01 BENTLY
describe
136483-01 Sensor Field Wiring Directly Connected to Proximitor/Seismograph
Monitor the internal barrier 1/0 module. Please note that selecting Prox/Accel
The Internal Barrier 1/O option will disable certain sensor type options.
Prox/Velom Internal Barrier 1/0
The sensor field wiring is 136483-01, which is directly connected to the proximitor/seismograph
Monitor the internal barrier 1/0 module. Please note that selecting Prox/Velom
The Internal Barrier 1/O option will disable certain sensor type options.
136483-01 Sensor Field Wiring Directly Connected to Proximitor/Seismograph
Monitor the internal barrier 1/0 module. Please note that selecting VelomInternal
The Barrier 1/O option will disable certain sensor type options.
TMR input/output
Used when three identical adjacent 136483-01 monitors and three TMRI/O modules
Install for TMR applications. Discrete and Bussed
The configuration uses the same external 1/0 module, but the wiring method is different
According to the following paragraphs.
TMRI/O (discrete)
Use this option when redundant sensors and field wiring are required
Required. A set of twelve transducers is used to provide input signals
Three identical adjacent displays. Each transducer is connected to a
136483-01 External Junction Box, then routed to Proximitor/Seismic TMR
1/O module using 25 pin cable. The recorder field wiring is connected to the
An external terminal block, then routed from outside
Terminal block pin cable through 9-Proximitor/Seismic TMR1/O module.
TMR input/output
Used when three identical adjacent 136483-01 monitors and three TMRI/O modules
Install for TMR applications. Discrete and Bussed
The configuration uses the same external 1/0 module, but the wiring method is different
According to the following paragraphs.
