140CRP93200 SCHNEIDER
Overview of Schneider Electric 140CRP93200
Modicon 140CRP93200 is a redundant RIO sub station adapter solution. Imagine this module providing additional protection when your system experiences unexpected interruptions. These sensitive processes require the protection that Modicon 140CRP93200 can provide for you. It can ensure that your network maintains optimal operation in the event of an interruption and does not miss any beat.
features
RIO topology with redundant cables: When there are each I/O sub station on the system, a MA0185100 T-connector is required. The reason is that you must electrically isolate the substation from the main cable. This way, your system can prevent potential impedance mismatches and cable disconnections. You must maintain a signal strength of at least 14 decibels between each I/O substation and the trunk cable. There is a signal loss of 1 decibel when the relay cable passes through the T-connector. You can obtain a total of 35 decibels of sound from the head of the RIO CPU. The entire cable architecture is not allowed to exceed this limit.
advantage
Hot standby system with Unity Pro software: Some systems require higher requirements than typical applications. In these cases, the space for errors is smaller and process interruptions cannot be tolerated. What does this system look like? There will be two PLC racks, one main and one backup; Both will have the same hardware configuration. The main will execute the application and control I/O, while the second backup will remain in the background to predict any potential failures. If the main system fails, the backup system will automatically start and complete application and I/O control. This is a transparent process, as the conversion occurs without any obstacles in the output.
Part number 140CRP93200
Manufacturer Schneider Electric
Model # 140CRP93200
Type I/O module
Module Format Standards
Product or component type RIO front-end adapter module
Product Compatibility Quantum 200/500/800 Series
Symax (any combination)
Offline/Network<=31
I/O word/sub station 64 inputs/64 outputs
Cable type coaxial 75 ohms
Transmission rate 1544 Mbit/s
Dynamic range 35 dB
Isolation voltage 500 V DC coaxial center and ground
2 F-type female connectors with redundant cables for electrical connection
Diagnostic startup LAN controller check
Memory check
charge
Power consumption (W) 3W 2-channel
Marking CE certification
Bus current requirement of 750 mA 2-way