140DDO35300 SCHNEIDER
Schneider Electric 140 DDO 35300 Overview
The Modicon Quantum 140 DDO 35300 source output module is manufactured by Schneider Electric and is used on the Quantum EcoStruxure Control Expert platform. 140 DDO 35300 is a 24 Vdc DC output capable of 8 sets of 4-point outputs.
features
Schneider Electric 140 DDO 35300 is used to switch 24 VDC power loads. What is the 140 DDO 35300 DC output 24 VDC 4 x 8 source module used with? It is used to connect to the shared output common terminal of 0 V. This modular unit has 32 outputs, namely eight (8) sets of four (4) output points. The logic level of this module is true high, and the external power supply range is 19.2… 30 VDC. The power distribution of 140 DDO 35300 is 1.75 W+0.4 V x total module load current. The bus current required for Modicon 140 DDO 35300 is 330 mA. It adopts output fuse blown fault detection and on-site power loss.
The maximum operating voltage of Schneider Electric 140 DDO 35300 is 19.2… 30 VDC, while for a 1 ms decay pulse, the maximum absolute voltage is 56 VDC. The voltage drop in the open state is 0.4 VDC @ 0.5 A.
Modicon 140 DDO 35300 has a maximum load current of 0.5 A per point for 4 points, and a maximum load current of 4 A per point for 8 groups. The maximum load current of the module is 16 A. The maximum surge current is 140 DDO 35300. Each point of the output module has a duration of 5 mA @ 500 ms (no more than 6 per minute). It has an OFF state leakage point of 0.4 mA @ 30 VDC.
advantage
Schneider Electric 140 DDO 35300 undergoes group to group isolation for 1 minute at 500 VAC RMS and group to bus isolation for 1 minute at 1780 VAC RMS. This Modicon Quantum unit has internal transient voltage suppression output protection.
The Modicon Quantum 140 DDO 35300 features LED indicators to indicate important functions on the output module. When there is bus communication, some LED descriptions include green ACTIVE. If an error is detected outside the module, a red F error LED will appear. For each of the 32 outputs, the green LED indicator will light up when the channel or point is open.
