350050-01-00 BENTLY
Manufacturer : Bently Nevada
Product No. : 3500/50M-01-00
Product type : Tachometer Module
Made in U.S.A
Can add on Certificate Of Origin (COO)
I/O module type : 01 = I/O module with internal terminations
Agency approval option : 00 = None
Shipping weight : 3Kg
Reward Points
describe
3500/50-01-00 values are bypassed or invalidated (for example, whenSensors). The selected value can be between the minimum and maximum valuesFull scale range value. Only the values available in the recorder output,The communication gateway and display 3500/50-01-00 interface module are clampedSpecify a value when the proportional value is invalid.Recorder outputThe proportional value of the channel sent from 3500/50-01-00 to a 4-20mA recorder.The recorder output is proportional to the measured value on the channelThe increase in proportional value over the full scale range will beHigh gear on the bar chart display will cause an increaseCurrently outputting from the recorder. If the channel is bypassed, the output will beClamp to the selected clamp value or 2mA (if 2mA is clamped)Select).
The time for which the 3500/50-01-00 proportional value must remain at or exceed the alarm level
Or below the alert level before the alert is declared active.
alert
When the sensor signal level exceeds
Selected alarm/alarm 1 set point. This setpoint can be set on the setpoint
Screen. Alarm time 3500/50-01-00 delay always set to one second interval (from 1 to
60) For all available proportional values.
danger
When the sensor signal level exceeds
Selected Danger/Alarm 2 Setpoint. This setpoint can be set on the setpoint
Screen.
100 millisecond option
The 3500/50-01-00 100 millisecond (typical) option is only applicable to hazardous time delays and has
The results are as follows:
-If the 100 millisecond option is turned off ():
-The danger time delay can be set to a one second interval (from 1 to
60).
-Danger time delay can be set for any two available ratios
