PLC

9563-810 TRICONEX

9563-810 TRICONEX Digital Internal Output Terminal Board

A digital quantity is defined as a discrete signal that is intermittently changed in both time and value. The basic digital quantities are 0 and 1, which are reflected on a switch to indicate whether a switch is turned off (0) or turned on (1).

The digital quantity module of PLC is used to detect digital quantity signals, commonly used as switching quantity (bump level) input and output; For example, the button is connected to a digital input module, and the coil is connected to a digital output module.

9563-810 analog quantity is defined as a signal that continuously changes both in time and number

Get A Quote
Contact Us

9563-810 TRICONEX

9563-810 TRICONEX Digital Internal Output Terminal Board

A digital quantity is defined as a discrete signal that is intermittently changed in both time and value. The basic digital quantities are 0 and 1, which are reflected on a switch to indicate whether a switch is turned off (0) or turned on (1).

The digital quantity module of PLC is used to detect digital quantity signals, commonly used as switching quantity (bump level) input and output; For example, the button is connected to a digital input module, and the coil is connected to a digital output module.

9563-810 analog quantity is defined as a signal that continuously changes both in time and number

For example, analog signals such as voltage, current, temperature, frequency, etc. transmitted through various sensors or transmitters,

Generally, 9563-810 is used in PLC with 0 (or 4) mA~~20 mA, – 10 (or 0) V~+10V, etc.

The analog module of the PLC is used to detect or output voltage or current signals, such as temperature, pressure, and other signals. The analog input module is used to schedule and control the valve by scheduling the output current or voltage

The analog output module is used for the opening degree of.

TRICONEX 9563-810 scenario. Typically, during OVD execution, the command state at each point is temporary

Reverse on one of the output drivers, one after the other. The loopback module allows each

TRICONEX9563-810 microprocessor reads the output value of the point to determine whether there is a potential fault

In the output circuit. (For devices that cannot tolerate any length of signal conversion, OVD

You can disable the on AC and DC voltage digital output modules.)

TRICONEX 9771-210、9753-1XX、9753-1、9662-910、9662-810、9662-610、9661-610、9563-810、8312、8311NTRICONEX 9771-210、9753-1XX、9753-1、9662-910、9662-810、9662-610、9661-610、9563-810、8312、8311NTRICONEX 9771-210、9753-1XX、9753-1、9662-910、9662-810、9662-610、9661-610、9563-810、8312、8311N

Allen Bradley 1746-N14 Ser A Analog Input Module

Siemens 6ES7 134-4FB00-0AB0 Analog Input Module

Allen Bradley 1794-IE8 Flex I/O Analog Input

AMX(NXC-V4I4)Voltage Output/Analog Input Card FG2025

Scroll to Top