A06B-6130-H002 FANUC
Overview of Fanuc A06B-6130-H002
Fanuc servo amplifier β The i-series SVM A06B-6130-H002 is part of a system consisting of three basic modules and two optional modules. The configuration includes a servo amplifier, an AC line filter, connectors, fuses, and a power transformer module. Connect 128 DI and 128 DO through I/O links to CNC or similar host modules. The servo amplifier host sends commands to the servo amplifier unit using a ladder program. Interface monitoring status. Command commands enter the servo amplifier module and respond to commands to enter the host unit, such as CNC.
advantage
The I/O link used by Fanuc A06B-6130-H002 communicates with the interface area divided into two sectors. One of the interface areas is the signal area. The signal area is the area where reset and alarm signals are located. The second interface area is the command code area. Command code area for moving commands and monitoring status command codes. This interface has multiple functions and can communicate with Fanuc A06B-6130-H002. It can directly read/write signals and use it to select appropriate interface modes and other functions, such as starting and stopping operations, and monitoring the conditions that trigger alarms. Using information collected from the interface, notify the servo amplifier of commands issued by linking function codes and command data. Basically, the interface transfers data to or from the servo amplifier.
Usage of Fanuc A06B-6130-H002
The two interface operation modes for communication with Fanuc A06B-6130-H002 are peripheral device control and direct command. How is the mode selected? DRC signal notification selection in the signal area. The direct command interface sends positioning and operation instructions to the servo amplifier. It can also issue other commands, such as wait, peripheral read/write, and diagnostic data commands. Many servo amplifier operations can be achieved through a direct command interface. Another interface is the peripheral device control interface. It can send commands to manipulate peripheral machine tools. This will affect positioning operations, such as shaft clamping and loosening, which can be completed with a simple command. If the ladder program is already available, this is a useful interface.
Part number A06B-6130-H002
Manufacturer Fanuc
Model # A06B6130H002
Type servo amplifier
Interface fiber
Input 240 volts
Output 6.8A
Rated input 50 Hz/60 Hz
Three phase 200V-240V
1 phase 220V-240V
