FBM04 FOXBORO
describe
FOXBORO FBM04
0 to 20mA input/output interface module
Contains four 20 mA DC analog input channels and
Four 20 mA DC analog output channels. Each input
The channel accepts analog sensor inputs, such as 4
To a 20mA transmitter or self powered 20mA source.
Each output channel drives an external load and
Generate 0 to 20 mA output. This module executes
The required signal conversion to convert
From/to on-site sensors
The electrical input/output signals of the actuator are connected to/from the redundant fieldbus. The
Module as the main module, independently connected
Redundant fieldbus.
This module executes simulated 1/O applications
Program. The configurable options for this program
Is the analog input resolution (based on each module)
Fault safe configuration (hold/fallback), simulation
Output fault safe fallback data (based on each channel
）Enable fieldbus switching and fieldbus
Switching time.
Provide optional types of termination cable components
, including for
Internal bypass sockets for each output channel on the front connector of the fieldbus module. Jack accepts data from
1/A series output bypass station or other external
Bypass plug for 20 mA power supply, for maintenance operations that require
Application of maintaining output
For example, when
Replace the faulty module. Common characteristic power supply
FOXBORO FBM04
Field Termination Connection (a)
Split terminal blocks
24 screw clamp terminals
Direct connection block
24 screw clamp terminals
PLUG CONNECTOR BLOCK
34 pin connector. coordination:
-Burndy MSD 34 PM 118
(Plug with strip cable clamp)
– Burndy MSD 34 PM 124
(Plug with clamshell cover)
-Burndy MSD 34 PM 824
(Plug with suitcase cover)
-Or equivalent product
requirement
Input voltage range (redundant)
26 to 42V DC
power waste
14W (maximum) heat dissipation
12W
The minutes between the (maximum) Qianhe channel and Earth (ground), or between a given channel and Qianhe other channels, do not necessarily mean that these channels are permanently connected to hazardous voltage circuits using dry connections, and these channels are connected to the large
Voltage of 30Vac or 60Vdc will violate Electrical safety
