FBM223 FOXBORO
Foxborough FBM223The data communication between FBM232 and field devices is achieved through theRJ-45 connector.RJ-45 of FBM232
The connector can be connected throughHub or Ethernet switch connected to the siteEquipment (seeEthernet switch for use with FBM232 on page 8). MultipleConnecting the device to FBM232 requires a hub or switch.ConfiguratorFDSI Configurator SettingsPort and device configuration files based on FBM232 XML. portConfigurator allows for easy setup
Communication parameters for each port (e.g,Dynamic Host Configuration Protocol (DHCP), IPAddress). Not all devices require a device configuratorBut when needed, it will configureSpecific considerations specific to equipment and points (e.g,Scan rate, address of data to be transmitted, andThe amount of data to be transmitted in a transaction)。
describe
The FBM232 Field Device System Integrator (FDSI) module provides a single Ethernet interface between a single port field 1/0 device and the Foxboro Evo system.
summary
FBM232 connected to a single 10 Mbps or
100 Mbps copper Ethernet network with
Communicate with devices. FBM232 connected to Ethernet
Switch or hub to connect with a
External devices or up to 64 external devices for communication. The general network configuration is shown in Figure 1
As shown in. The main feature of FBM232 is: 0 10Mbps or 100 Mbps Ethernet network transmission rate to/from field devices to communicate with up to 64 field devices
The 01/O software driver can be downloaded from the
Available protocol library downloads
0 up to 2000 DCI block connection ports using Ethernet connection
Integrate on-site device data into the Foxboro Evo control database for on-site installation in a 0G3 level (harsh) environment,
Description
The PROFIBUS-DP communication interface module (FBM223) provides the interface between PROFIBUS-DP slave devices (such as motor drivers, I/O modules, and field I/O devices) and the I/A Series system. PROFIBUS is an open fieldbus standard that is independent of suppliers and suitable for a wide range of applications in process automation and manufacturing. The PROFIBUS fieldbus standard EN 50170 ensures the independence and openness of suppliers, which specifies the functional, electrical, and mechanical characteristics of the serial transmission bus.
PROFIBUS-DP communication interface module
The PROFIBUS-DP communication interface module (FBM223) provides the interface between PROFIBUS-DP slave devices (such as motor drivers, I/O modules, and field I/O devices) and the I/A Series system.
