IC670ALG230 GE
The IC670ALG230 is a 16-bit voltage/current analog input module manufactured by GE Fanuc Automation. It is designed to work with the RX3i Programmable Logic Controller system.
This module can measure both voltage and current signals with a high degree of accuracy. It has 8 input channels, each of which can be configured to measure either voltage or current. The voltage range is -10V to +10V, while the current range is 4-20mA.
The input channels are isolated from each other and from the backplane, providing protection against noise and voltage spikes. The module also has a built-in self-test feature that checks for proper operation at power-up and during normal use.
The module has a variety of parameters that can be configured to suit different applications. These include:
- Filter settings: The module can be configured to use a low-pass filter to remove high-frequency noise from the input signals. The filter can be set to different cutoff frequencies depending on the application requirements.
- Input calibration: The module can be calibrated to compensate for any offset or gain errors in the input signals. This can be done manually or automatically using an external signal source.
- Scaling: The module can be configured to scale the input signals to different engineering units. For example, a voltage signal could be scaled to represent temperature or pressure.
- Alarm settings: The module can be configured to generate alarms if the input signals exceed certain thresholds. These alarms can be configured to trigger a variety of actions, including setting outputs and sending notifications.
Overall, the IC670ALG230 is a versatile analog input module that offers high accuracy and a range of configurable parameters. It is ideal for a wide range of applications, from process control to data acquisition.
