IC695ETM001 GE
This document provides detailed information and parameters for the IC695ETM001 GE product.
Product Description
The IC695ETM001 is an Ethernet module manufactured by GE. It is designed to provide communication between a control system and devices on an Ethernet network.
Features
- Supports up to 8 Ethernet connections
- Compatible with GE’s PACSystems RX3i and RX7i controllers
- Supports multiple communication protocols, including Modbus TCP/IP and Ethernet Global Data (EGD)
- Provides diagnostic and status information via LEDs
Parameters
The following are the parameters for the IC695ETM001 module:
- IP Address: The IP address of the module on the Ethernet network.
- Subnet Mask: The subnet mask for the module’s IP address.
- Default Gateway: The default gateway for the module’s IP address.
- MAC Address: The unique identifier for the module on the Ethernet network.
- TCP Keep-Alive Interval: The time interval between TCP keep-alive packets.
- EGD Configuration: The configuration for Ethernet Global Data communication.
Installation
To install the IC695ETM001 module, follow these steps:
- Ensure that the RX3i or RX7i controller is powered off.
- Insert the module into an available slot in the controller.
- Power on the controller.
- Configure the module parameters using the configuration software provided by GE.
Troubleshooting
If you experience issues with the IC695ETM001 module, try the following:
- Ensure that the module is configured correctly.
- Check the Ethernet network for connectivity issues.
- Ensure that the firmware on the module is up to date.
- Contact GE technical support for further assistance.
