IS420UCSBH1A GE

Product Description
The IS420UCSBH1A controller is the first of the UCSB controllers manufactured by General Electric as part of the Mark VIe Control Safety System Series. This controller is similar to the UCSC controller and while it does not have the same hardware the software needed to operate this controller is nearly identical. According to the GEH-6725 Mark VIe and Mark VIeS, Controls Equipment HazLoc Instruction Guide the IS420UCSBH1A controller is labeled as a Mark VIe, LS2100e, and EX2100e controller. There is also a specific microprocessor used with this controller, the microprocessor installed in this device is the 600 MHz EP80579 Intel Processor.

small table that labels the electrical/power supply ratings needed to power the IS420UCSBH1A, the ratings are as follows, a minimum voltage of eighteen direct currents, with a maximum of thirty volts of direct current, the nominal power rating is twenty-four and twenty-eight volts of direct current. The maximum current rating used with this device is 1.5 ADC.

When being mounted there are several certifications that are required to mount the IS420UCSBH1A controller in hazardous and non-hazardous locations alike. For example, when mounted in ATEX Zone 2, Group IIC, the certification needed is UL DEMKO 12 ATEX 1114875X. All certifications regarding the controller being mounted in Class I, Zone 2, Group IIC, non-hazardous, and Class I, Division 2, Groups, A, B, C, and D are the same, the certification requirements for these locations are UL E207685.

SCHNEIDER Prodis 21443 VIGI DT40 10A 300mA 10A RCBO DPN

Berger Lahr WS5-5.281-00 WS5-5.281-00 WS5528100

Siemens S5 6ES5 308-3UC11 6ES5308-3UC11 SINEC L2-DP

Siemens OP270 6AV6 542-0CA10-0AX0 6AV6542-0CA10-0AX0

Siemens S5 6ES5 752-0AA23 6ES5752-0AA23 6ES57520AA23

Mitsubishi E1100 06045C

Berger Lahr WDPM3-314.93202 WDPM 3-314.93202 POSITEC