SST-PB3-CLX-RLL AB
About SST-PB3-CLX-RLL
The SST-PB3-CLX-RLL module is a chassis module widely used by Allen Bradley in conjunction with the ControlLogix series. This chassis module is designed and manufactured by Molex. For communication, this module is equipped with a 9-pin PROFIBUS D-sub mother module. The SST-PB3-CLX-RLL module weighs 430 grams. This module is a PROFIBUS scanner for the Allen Bradley 1756 backplane system and Honeywell PlantScape system. It helps to enable the communication link between the CLX processor and remote I/O devices located on the PROFIBUS network. This module can be configured and programmed using the SST PROFIBUS configuration tool. This task helps to configure I/O on the network. The input and output data are mapped to the I/O data array of the ControlLogix 5550 controller. It also displays the connection status and any faults that may occur during normal module operation. Below the LCD panel are three LED indicators that display the COMM, SYS, and OK status of the module. The COMM LED indicates the network health status, the SYS LED indicates the PROFIBUS master station health status, and also scans all slaves in RUN mode. The OK LED indicates whether the module initialization is complete and whether the module is ready for operation. The operating temperature range of the SST-PB3-CLX-RLL module is 0 to 60 degrees Celsius. It also scans all slave units in RUN mode, and the OK LED indicates whether the module initialization is complete and whether the module is ready to run. The operating temperature range of the SST-PB3-CLX-RLL module is 0 to 60 degrees Celsius. It also scans all slave units in RUN mode, and the OK LED indicates whether the module initialization is complete and whether the module is ready to run. The operating temperature range of the SST-PB3-CLX-RLL module is 0 to 60 degrees Celsius.
SST-PB3-CLX-RLL is a Profibus scanner module that is compatible with the 1756 ControlLogix automation platform or Honeywell PlantScape control system. This module is manufactured by Molex, a partner company of Rockwell Automation.
SST-PB3-CLX-RLL is a single slot module that can be directly installed into any available slot in the 1756 chassis. A maximum of eight (8) modules can be installed in a single rack to enable communication between Logix processors and Profibus DP slave devices. It has one (1) 9-pin sub D connector that supports communication with up to 125 DP slave devices. This module supports Profibus network standard transmission speeds such as 9600, 19200, 31.25k, 45.45k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, and 12M baud. In addition, the module can operate with multiple Profibus master and slave stations using the aforementioned transmission speed.
SST-PB3-CLX-RLL supports synchronization and freezing commands when running as a Profibus master device; Each connected slave device supports a maximum of 122 input data words and 122 output data words. In addition, it can be configured to listen to up to 15 connections plus 1 output connection. Similarly, this module supports Profibus DPV1 master services, including Class 1: MSAC1_ Read、MSAC2_ Write and Class 2: MSAC2_ Initiate、MSAC2_ Read、MSAC2_ Write、MSAC2_ Idle and MSAC2_ Abort。
